Indonesia Issues New Regulation for Short-Range Communication Devices

SDPPI of Indonesia publishes the Regulation #4/2019 on Technical Requirements for Dedicated Short-Range Communication Devices.

This regulation applies to DSRC tools or devices that are going to be put to the market of Indonesia and contains general provisions and technical requirements to the equipment.

According to this Regulation, DSRC devices include:

Road-side Units

On-board Units

Among the technical requirements that should be considered are the following:

1. Power supply

It is applicable for devices with AC PSU with rated voltage of 220 V ± 10% with a frequency of 50 Hz ± 2%

The external PSU (AC/DC converter) must not affect the ability of the device to meet all the relevant technical parameters.

2. Non-Ionizing radiation protection

DSRC devices should comply with the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) Guidelines.

3. Electrical safety performance must be carried out against IEC 60950-1 requirements

4. EMC requirements must correspond to SNI ISO/IEC CISPR 32-2018 requirements

5. Operational use

Each DSRC device operation should fulfill the ETSI EN 300 674-2-1 V2.1.1 (2016-09) and ETSI EN 300 674-2-2 V2.1.1 (2016-11).